Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chevrolet >> 2010 >> Traverse LS, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 24 (Battery, Charging System And Starting System) >> Repair Instructions >> Battery Negative Cable Disconnection and Connection >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2009 Saturn Outlook, 2009 GMC Acadia, 2009 Chevrolet Traverse, and 2009 Buick Enclave. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Negative Battery Cable Terminal & Nut
    GM1860912Courtesy of GENERAL MOTORS CORP.
  1. Position and install the negative battery cable to the battery negative terminal (2).
    2. CAUTION: Refer to Fastener Caution .
  2. Tighten the negative battery cable terminal (1) nut.

    Tighten:  Tighten the nut to 9 N.m (80 lb in).

    3. Fig 2: Identifying Battery Cover Screw & Cover
    GM1860911Courtesy of GENERAL MOTORS CORP.
  3. Install the battery cover and screw.

    Tighten:  Tighten the screw to 1.6 N.m (14 lb in).

  4. Reset all of the customers radio station presets.
  5. Install the middle row floor matt, if equipped.
scientia non olet · About Mike's Workshop Manuals