Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chevrolet >> 2010 >> Traverse LS, AWD >> Repair and Diagnosis >> Body & Frame >> Seats >> Power Seat System >> Diagnostic Information and Procedures >> Power Seat Inoperative (Without Memory-A45) >> Circuit/System Testing >> Notes

Circuit/System Testing: Notes

  1. Disconnect the harness connector at the seat adjuster switch.
  2. Ignition OFF, test for less than 1 ohm between the ground circuit terminal B and ground.
    • If greater than the specified value, test the ground circuit for an open/high resistance.
  3. Ignition ON, verify that a test lamp illuminates between the B+ circuit listed below and ground.
    • Terminal E (AH5/AAQ)
    • Terminal D (AG1/AG2)
    • If the test lamp does not illuminate, test the B+ circuit for a short to ground or an open/high resistance.
  4. If all circuits test normal, test or replace the seat adjuster switch.
scientia non olet · About Mike's Workshop Manuals