Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chevrolet >> 2010 >> Cobalt SS >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 4 (Engine Controls And Fuel - 2.2L - Repair Instructions) >> Repair Instructions >> Knock Sensor Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different variant/trim than selected.
    Fig 1: View Of Knock Sensor (KS) Electrical Connector
    GM1656089Courtesy of GENERAL MOTORS CORP.
  1. Disconnect the knock sensor (KS) electrical connector (3).
    2. Fig 2: Identifying Knock Sensor
    GM1578476Courtesy of GENERAL MOTORS CORP.
  2. Remove the KS bolt.
  3. Remove the KS.
scientia non olet · About Mike's Workshop Manuals