Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chevrolet >> 2010 >> Chevy Express G2500, Van Cargo Extended, 6.6 L >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Controls And Fuel - 6.6L (LGH) - Repair Instructions >> Repair Instructions >> Nitrogen Oxides Sensor Replacement - Position 2 >> Removal Procedure

Removal Procedure

  1. Raise and support the vehicle. Refer to Lifting And Jacking The Vehicle .
  2. Fig 1: Nitrogen Oxide Sensor - Position 2
    GM2374136Courtesy of GENERAL MOTORS COMPANY

    Remove the nitrogen oxide sensor (1) from the exhaust.
  3. Remove the nitrogen oxide sensor fasteners (2) then remove the sensor (3).
scientia non olet · About Mike's Workshop Manuals