Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chevrolet >> 2010 >> Chevy Express G2500, Van Cargo Extended, 6.6 L >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Controls And Fuel - 6.6L (LGH) - Repair Instructions >> Repair Instructions >> Fuel Tank Filler Hose Replacement >> Installation Procedure

Installation Procedure

    Fig 1: View Of Fuel Tank Filler Hose
    GM2369211Courtesy of GENERAL MOTORS COMPANY
  1. Install the fuel tank filler hose (3).
  2. Connect the vent tube (2) to the fuel sender. Refer to Plastic Collar Quick Connect Fitting Service .
    3. CAUTION:

    Refer to Fastener Caution .

  3. Tighten the bottom filler pipe hose clamp (1) to 6 N.m (53 lb in).
    4. Fig 2: Identifying Filler Hose Ground Fastener
    GM2369164Courtesy of GENERAL MOTORS COMPANY
  4. Tighten the filler hose ground fastener (1) to 10 N.m (89 lb in).
    5. Fig 3: Identifying Filler Housing Fasteners
    GM2369148Courtesy of GENERAL MOTORS COMPANY
  5. Tighten the filler housing fasteners (1) to 10 N.m (89 lb in).
  6. Fill the fuel to the previous level.
scientia non olet · About Mike's Workshop Manuals