Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chevrolet >> 2009 >> Uplander Base, 3.9 M >> Repair and Diagnosis >> Electrical >> Charging Systems >> Engine Electrical >> Diagnostic Information and Procedures >> DTC C0900 >> Typical Scan Tool Data

Typical Scan Tool Data

Ignition Voltage Signal - EBCM

Circuit Short to Ground Open Short to Voltage
Operating Conditions:  Ignition ON, Engine OFF.
Parameter Normal Range:  11.50 Volts to 13.00 Volts.
B+ 0.00 Volts* 0.00 Volts* -
*The scan tool will not communicate with the EBCM if there is no B+ voltage.
scientia non olet · About Mike's Workshop Manuals