Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chevrolet >> 2009 >> Uplander Base, 3.9 M >> Repair and Diagnosis >> Brakes >> Traction Control >> Antilock Brake System >> Repair Instructions >> Vehicle Yaw Sensor with Vehicle Lateral Accelerometer Replacement >> Installation Procedure

Installation Procedure

    Fig 1: Locating Yaw Rate Sensor/Lateral Accelerometer
    GM1538732Courtesy of GENERAL MOTORS CORP.
  1. Install the yaw rate sensor (1) to the console bracket.
    2. CAUTION: Refer to Fastener Caution .
  2. Install the nuts (2) retaining the yaw rate sensor and tighten to 9 N.m (80 lb in)  .
  3. Connect the electrical connector (3) to the yaw rate sensor.
  4. Install the front floor console bracket assembly. Refer to Front Floor Console Bracket Assembly Replacement .
scientia non olet · About Mike's Workshop Manuals