Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chevrolet >> 2009 >> Traverse LT, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 51 (Antilock Brake System With Traction Control System & Stability Control System) >> Diagnostic Information and Procedures >> ABS Indicator Malfunction >> Circuit Verification

Circuit Verification

WARNING: This page is about a different car, the 2010 Saturn Outlook, 2010 GMC Acadia, 2010 Chevrolet Traverse, and 2010 Buick Enclave. However, it is still accessible from the selected car via links, so may be relevant.
  1. With a scan tool command the IPC display test ON and OFF. The ABS indicator should turn ON and OFF.
    • If the ABS indicator does not turn ON and OFF when commanded, replace the IPC.
  2. Replace the EBCM.
scientia non olet · About Mike's Workshop Manuals