Repair Verification
WARNING: This page is about a different car, the 2010 Saturn Outlook, 2010 GMC Acadia, 2010 Chevrolet Traverse, and 2010 Buick Enclave. However, it is still accessible from the selected car via links, so may be relevant.
- Start the engine.
- Command the EVAP vent solenoid closed with a scan tool.
- Increase the engine idle to 1, 200-1, 500 RPM.
- Observe the scan tool FTP sensor parameter. Verify the FTP sensor parameter is -0.9 to +0.9 mm Hg (-0.5 to +0.5 in. H2O).
- Clear the DTCs with a scan tool.