Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chevrolet >> 2009 >> Traverse LS, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 70 (Component Locations - Electrical Center Identification Views) >> Electrical Center Identification Views >> Fuse Block - I/P X4

Fuse Block - I/P X4

WARNING: This page is about a different car, the 2010 Saturn Outlook, 2010 GMC Acadia, 2010 Chevrolet Traverse, and 2010 Buick Enclave. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Fuse Block - I/P X4 Connector End View
GM1856789Courtesy of GENERAL MOTORS CORP.
Fuse Block Pin Identification - I/P X4

Pin Wire Circuit Function
1 0.35 RD/WH 1040 Battery Positive Voltage
2 - - Not Used
3 0.5 RD/WH 2140 Battery Positive Voltage (N38)
4 - - Not Used
5 0.35 PU/WH 1382 LED Dimming Signal
6 - - Not Used
7 0.35 RD/WH 1040 Battery Positive Voltage
8 - - Not Used
9 0.35 PU/WH 7005 LED Dimming Signal
10 - - Not Used
11 1 RD/WH 4240 Battery Positive Voltage
12 - - Not Used
Connector Part Information 
  • Harness: Instrument Panel
  • OEM: 7283-3442-40
  • Service: 89046712
  • Description: 12-Way F YESC Kaizen Series (L-GY)
Terminal Part Information 
  • Pins: 1, 3, 5, 7, 9
  • Terminal/Tray: 7116-4100-08/9
  • Core/Insulation Crimp: E/C
  • Release Tool/Test Probe: 12094430/J-35616-2A (GY)
  • Pins: 11
  • Terminal/Tray: 7116-4101-08/9
  • Core/Insulation Crimp: E/A
  • Release Tool/Test Probe: 12094430/J-35616-2A (GY)