Removal Procedure
- Remove the door trim panel. Refer to Rear Side Door Trim Panel Replacement (Traverse) or Rear Side Door Trim Panel Replacement (Acadia/OUTLOOK) or Rear Side Door Trim Panel Replacement (Enclave) .
- Remove the water deflector. Refer to Rear Side Door Water Deflector Replacement .
- Remove the energy absorber retainers and energy absorber from the door.
- Remove the covers that conceal the holes for the regulator bolts.
- Remove the window to regulator bolts (1). Refer to Rear Side Door Window Replacement .
- Raise and support the window in the full up position.
- Disconnect the electrical connector from the regulator motor.
- Loosen the upper bolt (3) that retain the regulator to the inner door.
- Remove the nut (2) that retains the motor to the door.
- Remove the lower regulator bolt (4).
- Lift the regulator/motor upward in order to release the upper bolt (3) from the door.
- Rotate the upper portion of the regulator forward.
- Beginning with the lower portion, remove the regulator through the door opening.
- Remove the upper bolt (3) from the regulator (5).
- Remove the window regulator motor (6) from the regulator. Refer to Door Window Regulator Motor Replacement .