Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chevrolet >> 2009 >> HHR SS, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 249 (HVAC System - Manual) >> Diagnostic Information and Procedures >> Air Recirculation Malfunction >> Component Testing

Component Testing

WARNING: This page is about a different car, the 2010 Chevrolet HHR. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install a 10-amp fused jumper wire between the control terminal A and 12 volts. Momentarily install a jumper wire between the control terminal B and ground. The recirculation actuator shaft should rotate.
    • If the function does not perform as specified, replace the recirculation actuator.
  2. Reverse the jumper wires; the recirculation actuator shaft should rotate.
    • If the function does not perform as specified, replace the recirculation actuator.
scientia non olet · About Mike's Workshop Manuals