Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chevrolet >> 2009 >> HHR SS, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 120 (Anti-Lock Brake System, Traction Control System & Stability Control System) >> Diagnostic Information and Procedures >> ABS Indicator Malfunction >> Circuit Verification

Circuit Verification

WARNING: This page is about a different car, the 2008 Chevrolet HHR. However, it is still accessible from the selected car via links, so may be relevant.
  1. Ignition ON, observe the ABS indicator to turn ON then OFF during the IPC bulb test.
  2. Ignition On, with a scan tool command the IPC display test ON and OFF. The ABS indicator should turn ON and OFF.
    • If the ABS indicator does not turn ON and OFF when commanded, replace the IPC.
  3. Replace the EBCM.
scientia non olet · About Mike's Workshop Manuals