Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chevrolet >> 2009 >> HHR LS, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 123 (Anti-Lock Brake System, Traction Control System & Stability Control System) >> Diagnostic Information and Procedures >> DTC C0460 >> Circuit/System Verification

Circuit/System Verification

WARNING: This page is about a different car, the 2008 Chevrolet HHR. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position the steering wheel to the straight-ahead, centered, position.
  2. Install a scan tool, ignition ON, engine OFF, and view SWPS signal. One of the signals should be approximately 0-720 degrees.
  3. As the steering wheel is turned, each signal should travel smoothly between 0 and 720 degrees.