Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chevrolet >> 2009 >> Chevy Express G2500, Van Passenger >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Engine Control System & Fuel System - 4.3L - Introduction) >> Repair Instructions >> Fuel Level Sensor Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different variant/trim than selected.
    Fig 1: Identifying Fuel Level Sensor & Retainer
    GM1940129Courtesy of GENERAL MOTORS CORP.
  1. Remove the fuel tank fuel pump module. Refer to Fuel Tank Fuel Pump Module Replacement .
  2. Disconnect the fuel level sensor wiring pigtail electrical connector from the module cover.
  3. Gently lift up the fuel level sensor retainer (1), disengaging the retainer from the sensor.
  4. Slide the fuel level sensor (2) down from the reservoir.