Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chevrolet >> 2009 >> Chevy Express G2500, Van Passenger >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Engine Control System & Fuel System - 4.3L - Introduction) >> Repair Instructions >> Fuel Hose/Pipes Assembly Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different variant/trim than selected.
    Fig 1: Identifying Fuel Feed Pipe Quick Connect Fitting
    GM1938263Courtesy of GENERAL MOTORS CORP.
  1. Install and route the fuel feed pipe (1) under the EVAP front pipe.
  2. Connect the fuel feed pipe quick connect fitting to the fuel tank module. Refer to Plastic Collar Quick Connect Fitting Service .
  3. Install the fuel feed pipe to the fuel tank clips (2 and 3).
  4. Install the fuel tank. Refer to Fuel Tank Replacement (with E26)  or Fuel Tank Replacement (without E26) .
scientia non olet · About Mike's Workshop Manuals