Circuit/System Verification
- Verify that the following DTCs are not set: P003A, P0047, P0048, P0106, P0403, P0405, P0406, P046C, P02E2, P02E3, P02E7, P02E8, or P02E9.
- Engine running at idle, observe the scan tool MAF Sensor parameter. The reading should be between 10-38 g/s depending on the ECT sensor.
- Operate the vehicle within the Conditions for Running the DTC to verify that the DTC does not reset. You may also operate the vehicle within the conditions that you observed from the Freeze Frame/Failure Records data.