Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chevrolet >> 2009 >> Chevy Express G2500, Van Cargo Extended, 6.6 6 >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System & Fuel System - 6.6L LMM - Introduction >> Repair Instructions >> Mass Airflow Sensor with Intake Air Temperature Sensor Replacement >> Removal Procedure

Removal Procedure

    Fig 1: Identifying MAF/IAT Sensor Electrical Connector
    GM1655957Courtesy of GENERAL MOTORS CORP.
  1. Disconnect the mass air flow (MAF)/intake air temperature (IAT) sensor electrical connector.
  2. Fig 2: Identifying MAF/IAT Sensor
    GM1731292Courtesy of GENERAL MOTORS CORP.

    Remove the MAF/IAT sensor TORX® screws.
  3. Remove the MAF/IAT sensor.
scientia non olet · About Mike's Workshop Manuals