Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chevrolet >> 2009 >> Chevy Express G2500, Van Cargo Extended, 6.6 6 >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System & Fuel System - 6.6L LMM - Introduction >> Repair Instructions >> Fuel Tank Filler Hose Replacement >> Installation Procedure

Installation Procedure

    Fig 1: Identifying Negative Battery Cable
    GM1824281Courtesy of GENERAL MOTORS CORP.
  1. Remove the caps from the fuel and vent holes in the fuel tank.
  2. Install the fuel fill hose to the tank and filler neck.
    3. CAUTION: Refer to Fastener Caution .
  3. Tighten the fuel fill hose clamps (1) at the tank and filler neck to 2.5 N.m (22 lb in).
  4. Lower the vehicle.
  5. Fill the fuel to the previous level.
scientia non olet · About Mike's Workshop Manuals