Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chevrolet >> 2008 >> Optra5 LS, Automatic >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls And Fuel - 2.0L (Diesel) >> Diagnostic Information and Procedures >> DTC P260E >> Circuit/System Description

Circuit/System Description

The diesel particulate filter regeneration lamp is located on the instrument panel cluster (IPC). The lamp informs the driver when a diesel particulate filter service is required. The engine control module (ECM) monitors the lamp control circuit for conditions that are incorrect for the commanded state of the lamp. For example, a failure condition exists if the ECM detects low voltage when the lamp is commanded OFF, or high voltage when the lamp is commanded ON.