Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chevrolet >> 2008 >> HHR SS, Standard >> Repair and Diagnosis >> Brakes >> Anti-Lock Brake System, Traction Control System & Stability Control System >> Diagnostic Information and Procedures >> ABS Indicator Malfunction >> Circuit Verification

Circuit Verification

  1. Ignition ON, observe the ABS indicator to turn ON then OFF during the IPC bulb test.
  2. Ignition On, with a scan tool command the IPC display test ON and OFF. The ABS indicator should turn ON and OFF.
    • If the ABS indicator does not turn ON and OFF when commanded, replace the IPC.
  3. Replace the EBCM.
scientia non olet · About Mike's Workshop Manuals