Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chevrolet >> 2008 >> Aveo Base >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls And Fuel - 1.6L - Introduction (2 Of 2) >> Repair Instructions >> Manifold Absolute Pressure Sensor Replacement >> Removal Procedure

Removal Procedure

    Fig 1: View Of Manifold Absolute Pressure Sensor
    GM1348510Courtesy of GENERAL MOTORS CORP.
    CAUTION: Refer to Battery Disconnect Caution .
  1. Disconnect the negative battery cable.
  2. Remove the manifold absolute pressure (MAP) sensor electrical connector.
  3. Disconnect the vacuum hose.
  4. Remove the MAP sensor bolt.
  5. Remove the MAP sensor.
scientia non olet · About Mike's Workshop Manuals