Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chevrolet >> 2007 >> Silverado Classic 1500 HD, RWD >> Repair and Diagnosis >> Accessories & Equipment >> Entertainment Systems >> Cellular System, Entertainment System, And Navigation System >> Repair Instructions >> Radio Replacement >> Installation Procedure

Installation Procedure

    Fig 1: Radio & Screws
    GM854851Courtesy of GENERAL MOTORS CORP.
  1. Connect the coaxial cable to the radio.
  2. Connect the wire connectors.
  3. Push in the radio assembly in the opening in order to install the screws.
    4. NOTE: Refer to Fastener Notice .
  4. Install the 3 screws (1).

    Tighten:  Tighten the screws to 1.6 N.m (14 lb in).

  5. Install the cluster bezel. Refer to Instrument Panel Cluster Trim Plate Bezel Replacement .
  6. Calibrate the new radio assembly. Refer to Service Programming System (SPS) .
  7. Refer to Control Module References for programming and setup information.
scientia non olet · About Mike's Workshop Manuals