Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chevrolet >> 2007 >> Optra5 LS, Standard >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transaxle - ZF 4HP 16 - Specifications, Component Locations And Repairs >> Repair Instructions >> Shift Control Cable Replacement - Floor Shift >> Removal Procedure

Removal Procedure

    Fig 1: Identifying Shift Control Cable And Clip
    GM1255921Courtesy of GENERAL MOTORS CORP.
    CAUTION: Refer to Battery Disconnect Caution .
  1. Disconnect the negative battery cable.
  2. Remove the clip from the selector lever connection on the transaxle case and disconnect the shift control cable from the connection.
  3. Remove the clip from the shift control cable at the transaxle mount connection.
    4. Fig 2: View Of Shift Control Cable Adjuster, Bracket And Pinch Nut
    GM1290875Courtesy of GENERAL MOTORS CORP.
  4. Remove the floor console. Refer to Front Floor Console Replacement .
  5. Loosen the pinch nut on the shift control cable adjuster.
  6. Remove the cable from the shift control assembly.
    7. Fig 3: View Of Cable, Cowl And Grommet
    GM1290877Courtesy of GENERAL MOTORS CORP.
  7. Remove the cable from the transaxle mount.
  8. Pull the cable through the cowl, bringing the rubber grommet with the cable.
scientia non olet · About Mike's Workshop Manuals