Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chevrolet >> 2007 >> Optra LS, Standard >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transaxle - ZF 4HP 16 - Specifications, Component Locations And Repairs >> Repair Instructions >> Rear Cover Replacement >> Installation Procedure

Installation Procedure

    Fig 1: Identifying Rear Cover And Bolts
    GM1255980Courtesy of GENERAL MOTORS CORP.
  1. Install the rear cover.
    2. NOTE: Refer to Fastener Notice .
  2. Install the rear cover bolts.

    Tighten:  Tighten the bolts to 23 N.m (17 lb ft)  .

    3. Fig 2: View Of Sealing Sleeve
    GM1255951Courtesy of GENERAL MOTORS CORP.
  3. Turn the transaxle by 90 degrees.
  4. Install the sealing sleeve (Brake C).
  5. Install the valve body assembly. Refer to Control Valve Body Replacement .
scientia non olet · About Mike's Workshop Manuals