Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chevrolet >> 2007 >> Optra LS, Standard >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transaxle - ZF 4HP 16 - Specifications, Component Locations And Repairs >> Repair Instructions >> Park/Neutral Position Switch Replacement >> Removal Procedure

Removal Procedure

    Fig 1: Identifying Shift Control Cable And Retaining Clip
    GM1290880Courtesy of GENERAL MOTORS CORP.
  1. Disconnect the negative battery cable.
  2. Disconnect the electrical connector from the park/neutral position switch.
  3. Disconnect the shift control cable and the retaining clip.
    4. Fig 2: View Of Shift Lever And Nut
    GM1255925Courtesy of GENERAL MOTORS CORP.
  4. Remove the shift lever nut and the shift lever.
    5. Fig 3: View Of Park/Neutral Start Switch
    GM1255926Courtesy of GENERAL MOTORS CORP.
  5. Remove the park/neutral start switch.
scientia non olet · About Mike's Workshop Manuals