Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chevrolet >> 2007 >> Optra LS, Standard >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls And Fuel - 1.8L (LDA) >> Diagnostic Information and Procedures >> DTC P0122 or P0123 >> Circuit/System Verification

Circuit/System Verification

  1. Ignition ON, observe the TP Sensor parameters with a scan tool. Verify the TP sensor voltage is between 0.4-4.5 volts.
  2. Rapidly depress the accelerator pedal from the rest position to the wide open throttle position (WOT) and release pedal. Repeat the procedure several times. DTC P0122 or P0123 should not set.
  3. Slowly depress the accelerator pedal to WOT and then slowly return the pedal to closed throttle. Repeat the procedure several times. DTC P0122 or P0123 should not set.
  4. If the vehicle passes the Circuit/System Verification Test, then operate the vehicle within the conditions for running the DTC. You may also operate the vehicle within the conditions that are captured in the Freeze Frame/Failure Records Data List.
scientia non olet · About Mike's Workshop Manuals