Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chevrolet >> 2007 >> Optra LS, Standard >> Repair and Diagnosis >> Body & Frame >> Ignition Switch/Steering Lock >> Wiring Systems And Power Management - Specifications And Ignition Switch Replacement >> Repair Instructions >> Ignition and Start Switch Replacement >> Removal Procedure

Removal Procedure

    Fig 1: View Of Ignition Switch Wiring And Retaining Screw
    GM1308230Courtesy of GENERAL MOTORS CORP.
  1. Remove the ignition switch lock cylinder. Refer to Ignition Lock Cylinder Replacement .
  2. Remove the ignition switch retaining screw.
  3. Disconnect the wiring and remove the ignition switch.
scientia non olet · About Mike's Workshop Manuals