Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chevrolet >> 2007 >> Impala SS >> Repair and Diagnosis >> External Pages >> Different car >> Section 216 (Antilock Brake System With Traction Control System & Stability Control System) >> Repair Instructions >> ABS Automated Bleed Procedure >> Automated Bleed Procedure >> Preliminary Inspection

Preliminary Inspection

WARNING: This page is about a different car, the 2006 Pontiac Montana SV6, 2006 Chevrolet Uplander, and 2006 Buick Terraza. However, it is still accessible from the selected car via links, so may be relevant.
  1. Inspect the battery for full charge. Repair the battery and charging system as necessary. Refer to Diagnostic System Check - Vehicle in Vehicle DTC Information.
  2. Connect a scan tool to the data link connector (DLC) and select current and history DTCs. Repair any DTCs prior to performing the ABS bleed procedure.
  3. Inspect for visual damage and leaks and repair as needed.