Circuit/System Testing
WARNING: This page is about a different car, the 2007 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
- If the DTC is history, refer to Charging System Test .
- If the DTC is current, turn ON the ignition, and with a DMM, measure the voltage between the battery positive voltage circuits of the ESC module and the ground circuits of the ESC module.
- If the voltage is within 9.5-15 volts, replace the ESC.
- If the voltage is not within 9.5-15 volts, measure the voltage between the battery positive voltage circuits of the ESC module and a separate good ground.
- If the voltage is within 9.5-15 volts, test the battery positive ground circuits of the ESC module for high resistance or an open, and repair as necessary.