Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chevrolet >> 2007 >> Corvette Base, 2D Convertible, Automatic >> Repair and Diagnosis >> Electrical >> Charging Systems >> Battery, Charging System And Starting System >> Repair Instructions >> Battery Heat Shield Replacement >> Removal Procedure

Removal Procedure

    Fig 1: View Of Upper Plenum Heat Shield Retainer
    GM675295Courtesy of GENERAL MOTORS CORP.
  1. Remove the push-in retainer attaching the air inlet screen and battery heat shield to the plenum panel.
    2. Fig 2: View Of Battery Heat Shield
    GM675299Courtesy of GENERAL MOTORS CORP.
  2. Remove the push-in retainer attaching the battery heat shield to the wheelhouse panel.
  3. Lift the battery heat shield from the ground stud and remove the shield.
scientia non olet · About Mike's Workshop Manuals