Removal Procedure
CAUTION:
Refer to Battery Disconnect Caution
.
- Remove the upper fan shroud. Refer to Engine Coolant Fan Upper Shroud Replacement (4.3L, 4.8L, 5.3L, 6.0L) or Engine Coolant Fan Upper Shroud Replacement (6.6L) .
- Remove the drive belt. Refer to Drive Belt Replacement .
- Disconnect the auxiliary generator electrical connector.
- Remove the positive cable from the auxiliary generator, perform the following:
- Slide the boot down to access the terminal stud.
- Remove the positive cable nut.
- Remove the positive cable.
- Remove the auxiliary generator bolts (3).
- Remove the auxiliary generator (4).