Installation Procedure

WARNING: This page is about a different car, the 2006 Buick LaCrosse and 2006 Buick Allure. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Removing/Installing Courtesy Lamp Bulb & Socket

Courtesy of GENERAL MOTORS CORP.

Install the bulb to the door courtesy lamp socket.

Fig 2: Removing/Installing Lamp Socket & Courtesy Lamp Housing

Courtesy of GENERAL MOTORS CORP.

Install the lamp socket to the courtesy lamp housing, then rotate the socket clockwise.

Fig 3: Positioning Courtesy Lamp To Front Door Trim Panel

Courtesy of GENERAL MOTORS CORP.

Position the courtesy lamp to the front door trim panel.

Fig 4: Aligning Rear Edge Of Courtesy Lamp Retainer Tab To Front Door Trim Panel

Courtesy of GENERAL MOTORS CORP.

Align the rear edge of the courtesy lamp retainer tab to the front door trim panel.

Fig 5: Installing Courtesy Lamp To Front Door Trim Panel

Courtesy of GENERAL MOTORS CORP.

Install the courtesy lamp to the front door trim panel pressing the forward edge into place until the retainer is fully seated.

Fig 6: Identifying Courtesy Lamp Electrical Connector

Courtesy of GENERAL MOTORS CORP.

Connect the electrical connector from the courtesy lamp.
Install the front door trim panel. Refer to Trim Panel Replacement - Side Front Door in Doors.