Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chevrolet >> 2006 >> Uplander Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 36 (Battery, Charging System And Starting System) >> Repair Instructions >> Battery Tray Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2005 Buick LaCrosse and 2005 Buick Allure. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Battery Tray & Bolts
    GM461887Courtesy of GENERAL MOTORS CORP.
  1. Install the battery tray.
    2. NOTE: Refer to Fastener Notice .
  2. Install the battery tray bolts.

    Tighten:  Tighten the battery tray bolts to 5 N.m (44 lb in).

  3. Install the battery. Refer to Battery Replacement .
  4. Connect the negative battery cable. Refer to Battery Negative Cable Disconnect/Connect Procedure .
scientia non olet · About Mike's Workshop Manuals