Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chevrolet >> 2006 >> Uplander Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 224 (Engine Exhaust System) >> Repair Instructions >> Converter Hanger Assembly Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2006 Chevrolet Monte Carlo and 2006 Chevrolet Impala. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Catalytic Converter Hangers
    GM1553064Courtesy of GENERAL MOTORS CORP.
  1. Install the NEW catalytic converter pipe hangers (1), if necessary.
  2. Remove the support from the exhaust system, if necessary.
  3. Lower the vehicle.