Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chevrolet >> 2006 >> Uplander Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 210 (Antilock Brake System With Traction Control System) >> Repair Instructions >> Brake Pressure Modulator Valve (BPMV) Bracket Replacement

Brake Pressure Modulator Valve (BPMV) Bracket Replacement

WARNING: This page is about a different car, the 2006 Chevrolet Monte Carlo and 2006 Chevrolet Impala. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Replacing Brake Pressure Modulator Valve Bracket
GM1658843Courtesy of GENERAL MOTORS CORP.
Brake Pressure Modulator Valve (BPMV) Bracket Replacement

Callout Component Name
CAUTION: Refer to Brake Fluid Irritant Caution .
CAUTION: Refer to Brake Fluid Effects on Paint and Electrical Components Notice .
NOTE: Refer to Fastener Notice .
Fastener Tightening Specifications:  Refer to Fastener Tightening Specifications .Preliminary Procedure: Remove the Electronic Brake Control Module (EBCM). Refer to Brake Pressure Modulator Valve (BPMV) Replacement .
1 Retaining Nut

Tightening Specification:  Tighten to 3 N.m (27 lb in).
2 Retaining Nut

Tightening Specification:  Tighten to 10 N.m (89 lb in).
3 Mounting Bracket
scientia non olet · About Mike's Workshop Manuals