Engine Fails To Reach Normal Operating Temperature
WARNING: This page is about a different car, the 2006 Chevrolet Monte Carlo and 2006 Chevrolet Impala. However, it is still accessible from the selected car via links, so may be relevant.
Engine Fails To Reach Normal Operating Temperature
| Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
| 1 | Check the coolant level in the radiator surge tank. Refer to Draining and Filling Cooling System (LS4 Static Fill) or Draining and Filling Cooling System (LZE, LZ4, LZ9 Static Fill) or Draining and Filling Cooling System (9C1, 9C3 Static Fill) or Draining and Filling Cooling System (LS4 GE 47716 Fill) or Draining and Filling Cooling System (LZE, LZ4, LZ9, 9C1, 9C3 GE 4771 Fill) . Is the coolant at the proper level? |
- | Go to Step 3 | Go to Step 2 |
| 2 | Add coolant to the radiator surge tank as necessary. Does the engine still fail to reach normal operating temperatures? |
- | Go to Step 3 | System OK |
| 3 | Check for a blockage in the coolant passages. Are there any blockages in the coolant passages? |
- | Go to Step 4 | Go to Step 5 |
| 4 | Flush the cooling system or flow check the radiator. Refer to Flushing . Does the engine still fail to reach normal operating temperatures? |
- | Go to Step 5 | System OK |
| 5 | Check to see if the incorrect thermostat was installed or if it is stuck or sticks in the open position. Was the incorrect thermostat installed, or is it stuck or does it stick in the open position? |
- | Go to Step 6 | - |
| 6 | Replace the thermostat. Refer to Thermostat Replacement (RPOs LZE/LZ4/LZ9) or Thermostat Replacement (RPO LS4) . Does the engine still fail to reach normal operating temperature? |
- | - | System OK |