Power Window Switch Replacement (Impala)

WARNING: This page is about a different car, the 2006 Chevrolet Monte Carlo and 2006 Chevrolet Impala. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Replacing Power Window Switch

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
NOTE: Refer to Fastener Notice . Fastener Tightening Specifications: Refer to Fastener Tightening Specifications . Preliminary Procedure Remove the door panel. Refer to Trim Panel Replacement - Side Front Door (Impala) . Remove the front door switch bezel. Refer to Bezel Replacement - Front Door Switch (Impala) or Bezel Replacement - Front Door Switch (Monte Carlo) .
1	Plate Assembly, Side Door Armrest Switch Mount
2	Switch, Power Window

Callout

Component Name

NOTE: Refer to Fastener Notice .

Fastener Tightening Specifications: Refer to Fastener Tightening Specifications .

Preliminary Procedure

Remove the door panel. Refer to Trim Panel Replacement - Side Front Door (Impala) .
Remove the front door switch bezel. Refer to Bezel Replacement - Front Door Switch (Impala) or Bezel Replacement - Front Door Switch (Monte Carlo) .

Plate Assembly, Side Door Armrest Switch Mount

Switch, Power Window