Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chevrolet >> 2006 >> Uplander Base >> Repair and Diagnosis >> Body & Frame >> Windows >> Door System, Mirror System & Window System >> Repair Instructions >> Weatherstrip Replacement - Auxiliary >> Removal Procedure

Removal Procedure

  1. Fully open the sliding rear door.
    2. Fig 1: Identifying Auxiliary Weatherstrip
    GM1502970Courtesy of GENERAL MOTORS CORP.
  2. Use a heat gun in order to heat the sliding door auxiliary weatherstrip (2). Keep the heat gun 150 mm (6 in) from the surface. Use a circular motion while applying heat for about 30 seconds.
  3. Use a flat-bladed tool in order to peel the sliding door auxiliary weatherstrip from the panel surface. DO NOT damage the paint.
  4. Use oil-free naphtha or alcohol in order to clean the body panel.
scientia non olet · About Mike's Workshop Manuals