Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chevrolet >> 2006 >> Uplander Base >> Repair and Diagnosis >> Body & Frame >> Windows >> Door System, Mirror System & Window System >> Repair Instructions >> Power Sliding Door (PSD) Open/Close Pillar Switch Replacement >> Removal Procedure

Removal Procedure

  1. Turn off the PSD from the roof console switch bank.
    2. Fig 1: View Of Power Sliding Door (PSD) Open/Close Pillar Switch
    GM450709Courtesy of GENERAL MOTORS CORP.
  2. Remove the PSD OPEN/CLOSE switch from the center pillar.
  3. Disconnect the electrical connector from the PSD OPEN/CLOSE switch.
scientia non olet · About Mike's Workshop Manuals