Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chevrolet >> 2006 >> Uplander Base >> Repair and Diagnosis >> Body & Frame >> Seats >> Seat System >> Repair Instructions >> Upper Limit Switch Replacement - Sit-N-Lift >> Removal Procedure

Removal Procedure

  1. Remove the upper seat trim. Refer to Trim Replacement - Sit-N-Lift Upper .
  2. Remove the chain cover. Refer to Chain Cover Replacement - Sit-N-Lift .
    3. Fig 1: Locating Bolts For Limit Switch Bracket - Sit-N-Lift
    GM1412317Courtesy of GENERAL MOTORS CORP.
  3. Remove the bolts from the limit switch bracket.
  4. Disconnect the electrical connector.
    5. Fig 2: View Of Upper Limit Switch - Sit-N-Lift
    GM1412321Courtesy of GENERAL MOTORS CORP.
  5. Remove the switch.
scientia non olet · About Mike's Workshop Manuals