Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chevrolet >> 2006 >> Uplander Base >> Repair and Diagnosis >> Body & Frame >> Seats >> Seat System >> Repair Instructions >> Trim Replacement - Sit-N-Lift Base >> Removal Procedure

Removal Procedure

  1. Extend the seat to the outside position from the vehicle.
    2. Fig 1: View Of Trim Covers - Sit-N-Lift
    GM1368561Courtesy of GENERAL MOTORS CORP.
  2. Remove the fasteners from the upper trim seat base.
    3. Fig 2: View Of Front Lower Base - Sit-N-Lift
    GM1368294Courtesy of GENERAL MOTORS CORP.
  3. Remove the front seat base trim cover from the base.
scientia non olet · About Mike's Workshop Manuals