Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chevrolet >> 2006 >> TrailBlazer 6.0 H, AWD >> Repair and Diagnosis >> Brakes >> Antilock Brake System With Traction Control System & Stability Control System >> Repair Instructions >> Traction Control Switch Replacement (GMC, Chevrolet) >> Removal Procedure

Removal Procedure

  1. Remove the accessory trim plate. Refer to Trim Plate Replacement - Instrument Panel (I/P) Accessory (GMC) or Trim Plate Replacement - Instrument Panel (I/P) Accessory (Buick) or Bezel Replacement - Instrument Panel (I/P) Cluster (Chevrolet) or Bezel Replacement - Instrument Panel (I/P) Cluster (GMC, Buick) in Instrument Panel, Gages, and Console.
    2. Fig 1: Removing/Installing Traction Control Switch Electrical Connector
    GM651279Courtesy of GENERAL MOTORS CORP.
  2. Disconnect the electrical connector from the traction control switch.
  3. Release the traction control switch locking tabs located behind the trim plate.
  4. Remove the traction control switch from the trim plate
scientia non olet · About Mike's Workshop Manuals