Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chevrolet >> 2006 >> SSR Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 138 (Cruise Control System) >> Repair Instructions >> Clutch Pedal Cruise Control Release Switch Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2007 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Clutch Cruise Control Release Switch Electrical Connector
    GM71493Courtesy of GENERAL MOTORS CORP.
    CAUTION: Refer to Battery Disconnect Caution .
  1. Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection (6.0L) or Battery Negative Cable Disconnection and Connection (7.0L) .
  2. Remove the LH instrument panel (I/P) lower insulator panel. Refer to Instrument Panel Insulator Panel Replacement .
  3. Disconnect the clutch cruise control release switch electrical connector.
    4. Fig 2: Clutch Cruise Control Release Switch At Bracket
    GM71495Courtesy of GENERAL MOTORS CORP.
  4. Remove the clutch cruise control release switch from the bracket.
scientia non olet · About Mike's Workshop Manuals