Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chevrolet >> 2006 >> SSR Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 118 (Keyless Entry System And Remote Functions) >> Repair Instructions >> Ignition Lock Key Transmitter Antenna Replacement - Right Side (Convertible) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2007 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the right lock pillar trim. Refer to Body Lock Pillar Trim Panel Replacement in Interior Trim.
  2. Remove the rear window trim panel. Refer to Rear Compartment Side Trim Panel Replacement in Interior Trim.
  3. Disconnect the antenna wire lead from the antenna.
    4. Fig 1: View Of Ignition Lock Antenna & Bracket
    GM1231045Courtesy of GENERAL MOTORS CORP.
  4. Pull on the antenna to disengage the antenna from the retaining bracket.
scientia non olet · About Mike's Workshop Manuals