Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chevrolet >> 2006 >> SSR Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 101 (Wiper System & Washer System) >> Repair Instructions >> Windshield Outside Moisture Sensor Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2007 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
IMPORTANT: The windshield outside moisture sensor coupler is permanently mounted to the windshield and is not serviceable. Damage to the windshield or the windshield outside moisture sensor coupler will occur, if removed.
    Fig 1: View Of Windshield Outside Moisture Sensor Trim Cover
    GM746989Courtesy of GENERAL MOTORS CORP.
  1. Remove the trim cover from the windshield outside moisture sensor.
    2. Fig 2: View of Rain Sensor Module
    GM746991Courtesy of GENERAL MOTORS CORP.
  2. Release the windshield outside moisture sensor coupler retaining clips.
  3. Remove the windshield outside moisture sensor from the windshield coupler.
  4. Disconnect the windshield outside moisture sensor electrical connector.
scientia non olet · About Mike's Workshop Manuals