Receiver Replacement - Digital Radio (Convertible)

WARNING: This page is about a different car, the 2006 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Replacing Digital Radio Receiver (Convertible)

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
NOTE: Refer to Fastener Notice in Cautions and Notices. Fastener Tightening Specifications: Refer to Fastener Tightening Specifications .Preliminary Procedure: Remove the compartment lid extension. Refer to Compartment Lid Extension - Folding Top Stowage in Interior Trim.
1	Digital Radio Receiver Nuts (Qty 3) Tighten: 2 N.m (18 lb in)
2	Digital Radio Receiver Tip: Disconnect the electrical connectors.