Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chevrolet >> 2006 >> Optra5 LS, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 6 (Cautions And Notices) >> Introduction >> Sensing and Diagnostic Module Handling Caution

Sensing and Diagnostic Module Handling Caution

WARNING: This page is about a different car, the 2005 Chevrolet Optra5 and 2005 Chevrolet Optra. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION: Be careful when you handle a sensing and diagnostic module (SDM). Do not strike or jolt the SDM. Before applying power to the SDM:
  • Remove any dirt, grease, etc. from the mounting surface
  • Position the SDM horizontally on the mounting surface
  • Point the arrow on the SDM toward the front of the vehicle
  • Tighten all of the SDM fasteners and SDM bracket fasteners to the specified torque value

Failure to follow the correct procedure could cause air bag deployment, personal injury, or unnecessary SIR system repairs.
scientia non olet · About Mike's Workshop Manuals