Brake System (ABS) Performance (Reprogram Electronic Brake Control Module (EBCM)) (05-05-25-011)

WARNING: This page is about the Impala LS, 3.5 K, which is a different variant/trim than selected.

Publication date: 2005-10-31
Reference number: 05-05-25-011

Brake System (ABS) Performance (Reprogram Electronic Brake Control Module (EBCM))

TECHNICAL SERVICE BULLETIN

Reference Number(s): 05-05-25-011, Date of Issue: October 31, 2005

Affected Model(s):

2006 Chevrolet Impala, Monte Carlo; with Antilock Brake System (RPO JL9) and 18 Inch or 17 Inch Wheel

Condition

An improved brake module calibration has been released that can reduce minimum stopping distances. It is not expected that customers will experience any concern with their vehicle's braking performance. Information provided in this bulletin is provided to notify dealers of an available product improvement.

Correction

To enhance the antilock brake performance, technicians are to reprogram the electronic brake control module with an updated software calibration. These new service calibrations were released with TIS satellite data update version 11.0 available October 31, 2005. As always, make sure your Tech 2(R) is updated with the latest software version.

Warranty Information

For vehicles repaired under warranty, use:

Warranty Information

Labor Operation	Description	Labor Time
H9708*	Module, Electronic Brake Control - Reprogram	0.4 hr
* This is a unique labor operation number for bulletin use only. This number will not be published in the Labor Time Guide.