Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chevrolet >> 2006 >> Impala SS >> Repair and Diagnosis >> External Pages >> Different car >> Section 631 (Tire Pressure Monitoring System) >> Diagnostic Information and Procedures >> Scan Tool Output Controls

Scan Tool Output Controls

WARNING: This page is about a different car, the 2007 Buick Lucerne. However, it is still accessible from the selected car via links, so may be relevant.
Scan Tool Output Controls

Scan Tool Output Control Additional Menu Selections Description
Tire Pressure Monitor (TPM) Option TPM Option Enable After replacing the remote control door lock receiver (RCDLR), the scan tool must be used to enable the TPM option, refer to Control Module References .
After the TPM option is enabled, it can not be disabled.
Vehicle Tire Type and Tire Pressure Tire Type/Pressure Selection After replacing the RCDLR, the scan tool must be used to select the correct tire type and the front and rear tire pressures for the vehicle, refer to Control Module References .
scientia non olet · About Mike's Workshop Manuals